Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Headlight Bulb on the Honda WR-V

Model: Honda Wr V GL, MK 1 - Years 2017-2024
Part: Headlight bulb

Today, you will see the main instructions that will allow you to remove and replace the headlight bulb on the Honda WR-V. First, open the hood and start by removing the rubber protective cap located behind the headlight; then disconnect the electrical connector of the bulb by releasing the metal clip to remove it. Now install the new bulb, ensuring it has the same base (in this case, a new LED bulb is being installed); connect the electrical connector and reassemble the bulb into the headlight assembly, installing the rubber protection!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb of the Honda WR-V?
How to Replace the Headlight Bulb of the Honda WR-V?
Honda Wr V (2017-2024 / GL, MK 1) To replace the headlight bulb of the Honda WR-V, open the hood to access the components at the back of the headlight from inside the engine compartme…
How to Replace the Key Battery of the Honda WR-V
How to Replace the Key Battery of the Honda WR-V
Honda Wr V (2017-2024 / GL, MK 1) Replacing the battery inside the key of your Honda WR-V is very simple. With the following mini guide, you will complete the entire operation in just…
How to Replace the Key Fob Battery on a Honda WR-V
How to Replace the Key Fob Battery on a Honda WR-V
Honda Wr V (2017-2024 / GL, MK 1) In this tutorial, see how to replace the key fob battery on a Honda WR-V, a very simple and quick operation. For this, you will need a small flathead…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos