Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Xenon Bulb on a Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

In this video, we will see how to replace the Xenon bulb on a Honda Civic; to access the headlamp, it is necessary to remove the oil vapour recovery unit, and then unscrew the rubber cap and the Xenon power supply. Inside, there is a plastic clip holding the bulb, which we will turn counterclockwise.

Once released, remove the bulb with its holder; it is extremely important not to touch the bulb with your fingers. Insert it carefully, ensuring it does not touch anywhere, then close the plastic clip; the bulb should not move, and then we can restore power.

Replace the rubber cap and the oil vapour recovery unit back in place.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Honda Civic?
How to Replace the Front Headlamp Bulb on a Honda Civic?
Honda Civic (2006-2012 / MK 8) To replace the front headlamp bulb on a Honda Civic, detach the rivets securing the inner wheel arch cover corresponding to the bulb that needs repla…
How to Replace the Wiper Blades on a Honda Civic?
How to Replace the Wiper Blades on a Honda Civic?
Honda Civic (2016-2021 / MK 10) To replace the wiper blades on a Honda Civic, lift the arms and the respective blades so that they do not touch the windscreen. Position the blade ve…
How to change the time on a 2009 Honda Civic.
How to change the time on a 2009 Honda Civic.
Honda Civic (2006-2012 / MK 8) To change the time on a 2009 Honda Civic, perform the operation with the vehicle stationary and the ignition on. On the radio console, locate the but…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos