|
Do it yourself
| |||
| ||||
How to set the time on a Honda Civic MK8 with an aftermarket system
Model: Honda Civic
MK 8
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
In this video, you will see how to set the time on a Honda Civic MK8 with an aftermarket stereo system. The time and date adjustment is usually done through the stereo, but there are certainly differences with an aftermarket system, so the adjustment must be done differently. You will need to operate through the steering wheel controls. A patch cable for steering wheel control will be necessary to establish the connection. Press the "mode" button located on the left side of the steering wheel: the time will start flashing on the display, and you will adjust the time using the up/down buttons next to it.
Updated on 14 October 2026 by ScegliAuto
Related tutorials
Honda Civic
(2006-2012 /
MK 8)
This tutorial shows the steps to set the time in a Honda Civic. Get in the vehicle, insert the key into the ignition slot, and turn it to power on th…
Honda Civic
(2006-2012 /
MK 8)
In this tutorial, you will see how to set the time in the Honda Civic, a very simple and quick operation to perform after switching to daylight savin…
Honda Civic
(2006-2012 /
MK 8)
If you have disconnected the battery of your Honda Civic 8 for maintenance or any other reason and need to set the correct time, follow this simple p…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |