Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The replacement of the exhaust on the Husaberg FS 650 is done by loosening the screws that secure the side panel to the fender of the motorcycle: once this panel has been removed, the exhaust can be located, which must be freed from its supports by removing the screws. Once these have been removed, it will be possible to widen the corresponding ring and completely detach the exhaust so that the new one can be inserted: this must be fixed in its seat, connecting it to the manifold and then verifying that everything works properly.

Posted on 2 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Husaberg FS 650?
How do you replace the exhaust pipe of the Husaberg FS 650?
Fs 650 Supermoto In order to replace the muffler of the Husaberg FS 650, you need to loosen the screws that secure the side panel of the motorcycle, near the rear fen…
How do you replace the exhaust pipe of the Husaberg FS 650?
How do you replace the exhaust pipe of the Husaberg FS 650?
Fs 650 Supermoto The exhaust pipe of the Husaberg FS 650 can be replaced by loosening the screws that secure the side panel of the rear fender: once this panel has be…
How do you replace the exhaust pipe of the Husaberg FS 650?
How do you replace the exhaust pipe of the Husaberg FS 650?
Fs 650 Supermoto In order to replace the exhaust pipe of the Husaberg FS 650, you need to loosen the screws that secure the panel located on the left side of the bike…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos