Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husaberg
    3. : Fs 650 Supermoto

Husaberg Fs 650 Supermoto - Videoguide

Husaberg Fs 650 Supermoto
How do you replace the piston of the Husaberg FS 650?
In order to replace the piston of the Husaberg FS 650, you need to loosen the screws that secure the engine block to its housing, so that it can be completely …read all…
Posted on 31 December 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you top up the coolant on the Husaberg FS 650?
In order to perform the coolant top-up on the Husaberg FS 650, you need to remove the cap that provides access to the tank containing the coolant: this can be …read all…
Posted on 14 November 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you disassemble the engine of the Husaberg FS 650?
The disassembly operation of the Husaberg FS 650 engine is carried out by first unscrewing the screws that secure the side panels of the motorcycle, which …read all…
Posted on 13 October 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you disassemble the engine of the Husaberg FS 650?
The disassembly procedure of the Husaberg FS 650 engine is carried out by loosening the screws that secure the side panels of the motorcycle, which protect the …read all…
Posted on 1 July 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you disassemble the engine of the Husaberg FS 650?
The disassembly of the Husaberg FS 650 engine is done by removing the bolts that fix it to its supports in the lower part of the seat: once these bolts have …read all…
Posted on 15 April 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you adjust the valves on the Husaberg FS 650?
To adjust the valves on the Husaberg FS 650, you need to loosen the screws that secure the valve cover, which is located on the top of the engine block. Once …read all…
Posted on 5 April 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you remove the engine of the Husaberg FS 650?
In order to remove the engine of the Husaberg FS 650 from inside its housing, it is necessary to loosen the screws of all the components directly connected to …read all…
Posted on 2 June 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you disassemble the engine of the Husaberg FS 650?
The disassembly of the engine of the Husaberg FS 650 is carried out by unscrewing the screws that fix the side panels of the motorcycle to protect the engine …read all…
Posted on 24 May 2023 by ScegliAuto
Husaberg Fs 650 Supermoto
Changing the Husaberg FS 650 engine oil
Let's briefly discover the guide that will allow us to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Husaberg …read all…
Posted on 25 September 2022 by ScegliAuto
Husaberg Fs 650 Supermoto
How do I replace the radiator fan on the Husaberg FS 650?
In order to replace the Husaberg FS 650 radiator fan, you need to loosen all the side panels that are on the right side of the bike. By unscrewing these …read all…
Posted on 1 September 2022 by ScegliAuto
Husaberg Fs 650 Supermoto
How do you disassemble the engine of the Husaberg FS 650?
To be able to disassemble the Husaberg FS 650 engine, first of all you need to unscrew the screws that secure the side panels of the motorcycle placed to …read all…
Posted on 13 June 2022 by ScegliAuto
Husaberg Fs 650 Supermoto
Husaberg FS 650 Supermoto water pump disassembly
In today's video we will see instructions on how to disassemble the water pump of a Husaberg FS 650 Supermoto. First we go to remove the sleeve that is …read all…
Posted on 1 March 2024 by ScegliAuto
Antifreeze liquid (1) Engine (7) Engine oil (1) Pump (1) Radiator (1) Valve (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos