Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To perform the engine oil change on the Husaberg FS 650, you need to loosen the drain plug located at the central lower part of the motorcycle, corresponding to the oil pan. Once the plug has been removed, you will be able to let all the oil flow into a suitably positioned container so that you can close the plug once the draining is complete. You can now remove the oil filter from the lower part of the right side, allowing you to insert the new one. At this point, you can add the necessary amount of oil through the breather on the left side of the motorcycle.

Posted on 28 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Replacement for the Husaberg FS 650
Engine Oil Replacement for the Husaberg FS 650
Fs 650 Supermoto This guide will help you perform the routine maintenance service by replacing the engine oil and oil filter on the Husaberg FS 650 enduro bike. First…
Removing the Water Pump on a Husaberg FS 650 Supermoto
Removing the Water Pump on a Husaberg FS 650 Supermoto
Fs 650 Supermoto In today's video, we will go through the instructions on how to remove the water pump from a Husaberg FS 650 Supermoto. First, remove the hose connec…
How do you replace the exhaust pipe of the Husaberg FS 650?
How do you replace the exhaust pipe of the Husaberg FS 650?
Fs 650 Supermoto In order to replace the muffler of the Husaberg FS 650, you need to loosen the screws that secure the side panel of the motorcycle, near the rear fen…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos