Do it yourself
| ||||
|
Model: Husaberg Fs 650 Supermoto
In order to remove the engine of the Husaberg FS 650 from inside its housing, it is necessary to loosen the screws of all the components directly connected to the engine, which in this case are the exhaust pipe and the radiator located in the front part of the bike. Once these two components have been removed from their housing, it will be possible to proceed by loosening the screws which fix the side fairings and detaching them completely: this will allow the screws which fix the engine to the appropriate supports to be unscrewed, disconnecting the connectors and extracting it from its housing.
Posted on 2 June 2023 by ScegliAuto
|
How to replace the rear brake pads of Benelli TRK 502?In order to replace the rear brake pads of the Benelli TRK 502 it is necessary to loosen the bolts that fix the caliper, so that it can be detached from the relative disc of the rear wheel. Once the caliper has been removed, it will be possible to go and extract the old pads from the inside of the caliper so that the new spare parts can be inserted. Once the new pads have been inserted inside the caliper, it will be necessary to position the latter on its disc, fixing it with the bolts that were previously removed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |