Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil of the Husaberg FE 600, you need to loosen the drain plug located in the central lower part of the motorcycle: once this plug is unscrewed, you can drain the engine oil into a properly positioned container. The filter, also located in this area, can be removed from its seat to be replaced with a new spare part; after replacement, you can top up the oil. This must be done by inserting the necessary amount of oil through the vent on the right side.

Posted on 10 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Engine of the Husaberg FE 600?
How to Dismantle the Engine of the Husaberg FE 600?
Fe 600 To dismantle the engine of the Husaberg FE 600, you will need to loosen the bolts that secure the engine block to its housing, allowing it to be remo…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos