Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Husqvarna Fc 450 - Video guides

Husqvarna Fc 450
How to replace the front wheel on a Husqvarna FC 450?
To replace the front wheel on a Husqvarna FC 450, loosen the bolts securing the wheel to the fork, located on either side. Once these bolts are loosened, you …Read all…
Posted on 19 September 2026 by ScegliAuto
Husqvarna Fc 450
How to Replace the Air Filter on a Husqvarna FC 450
Below are the instructions for removing and replacing the seat and air filter on the Husqvarna FC 450 enduro bike. First, place your bike on a stand and start …Read all…
Posted on 8 September 2026 by ScegliAuto
Husqvarna Fc 450
How to replace the clutch on the Husqvarna FC 450?
To replace the clutch on the Husqvarna FC 450, you need to loosen the screws securing the cover of the bike, located on the right side of the bike. Once this …Read all…
Posted on 21 August 2026 by ScegliAuto
Husqvarna Fc 450
How to Replace the Stator of the Husqvarna FC 450?
To replace the stator of the Husqvarna FC 450, loosen the bolts securing the side fairings of the bike, allowing them to be removed to access the underlying …Read all…
Posted on 17 September 2026 by ScegliAuto
Husqvarna Fc 450
How to Perform a Service on the Husqvarna FC 450
This guide shows how to replace the engine oil and oil filter of the Husqvarna FC 450, following the instructions below. First, warm up the engine for a few …Read all…
Posted on 15 July 2026 by ScegliAuto
Husqvarna Fc 450
Change the engine oil and oil filter of the Husqvarna Fc 450
In this tutorial video, you will learn how to change the engine oil and oil filter, performing the routine maintenance service for the Husqvarna Fc 450 enduro …Read all…
Posted on 14 July 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos