Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Husqvarna FC 450

Model: Husqvarna Fc 450
Part: Air filter

Video tutorial

Below are the instructions for removing and replacing the seat and air filter on the Husqvarna FC 450 enduro bike. First, place your bike on a stand and start unscrewing the seat fixing screws located on the side.

Next, remove the left side plastic cover to access the air filter box, taking out the foam filter as shown in the video. At this point, replace or wash the air filter if necessary; then reattach the cover and finally the seat, applying the reverse procedure!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Change the engine oil and oil filter of the Husqvarna Fc 450
Change the engine oil and oil filter of the Husqvarna Fc 450
Fc 450 In this tutorial video, you will learn how to change the engine oil and oil filter, performing the routine maintenance service for the Husqvarna Fc 4…
How to Perform a Service on the Husqvarna FC 450
How to Perform a Service on the Husqvarna FC 450
Fc 450 This guide shows how to replace the engine oil and oil filter of the Husqvarna FC 450, following the instructions below. First, warm up the engine fo…
How to Replace the Stator of the Husqvarna FC 450?
How to Replace the Stator of the Husqvarna FC 450?
Fc 450 To replace the stator of the Husqvarna FC 450, loosen the bolts securing the side fairings of the bike, allowing them to be removed to access the und…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos