Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial video, you will learn how to change the engine oil and oil filter, performing the routine maintenance service for the Husqvarna Fc 450 enduro bike. First, place your bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew the screws of the oil filter cover to remove and replace the cartridge with a new one, as shown in the video. Finally, top up with new oil, checking the level!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fc 450 This guide shows how to replace the engine oil and oil filter of the Husqvarna FC 450, following the instructions below. First, warm up the engine fo…
Fc 450 Below are the instructions for removing and replacing the seat and air filter on the Husqvarna FC 450 enduro bike. First, place your bike on a stand …
Fc 450 To replace the stator of the Husqvarna FC 450, loosen the bolts securing the side fairings of the bike, allowing them to be removed to access the und…

How to Reset the Service on the Husqvarna FE 350?

In this tutorial, you will see how to reset the service on the Husqvarna FE 350, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine. Then, repeatedly press the button located to the right of the display until you reach the odometer reading "ODO". Once done, press and hold the opposite button for about 5 seconds, and when the screen changes, press the right button again.

Watch the video!


by ScegliAuto

More videos