Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's information will be useful for replacing the engine oil and oil filter, performing regular maintenance on the Husqvarna FX 450. First, we put the motorcycle on the stand and start by unscrewing the oil drain bolt found under the engine, letting it drain into a container for about ten minutes; then we unscrew the screws of the oil filter cover and replace the cartridge with the new one, as shown in the video. At this point, we pour the new engine oil, of the correct type, filling up to the maximum level mark.

Posted on 18 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front wheel of the Husqvarna FX 450?
How do you remove the front wheel of the Husqvarna FX 450?
Fx 450 In order to replace the front wheel of the Husqvarna FX 450, you need to loosen the screws that attach the front wheel to its seat at the base of the…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos