Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. :
  3. Fc 350
    4. : Engine oil change on Husqvarna FC 350

Model: Husqvarna Fc 350
Part: Engine oil
Engine oil change on Husqvarna FC 350

In today's video tutorial we will see how to change the engine oil, performing the regular routine maintenance service, on a Husqvarna FC 350, in simple steps. First we place our motorbike on the stand and we go to warm up the engine for a few seconds; then we turn off the engine and remove the oil vent bolt that we find on the lower part of the engine, as shown in the video. At this point we drain the oil in a container for about ten minutes; we remove the left crankcase to replace the oil filter and finally insert the new oil!


Posted on 24 January 2024 by ScegliAuto

How do you change the Benelli TnT 150 engine oil?

The replacement of the Benelli TnT 150 engine oil is carried out by unscrewing the drain plug of the tank containing the oil, located in the lower part of the motorcycle. Once this has been unscrewed, it will be possible to go and place a container under it, so that the oil is completely collected. Then you can close the cap once everything is finished and unscrew the screws that fix the casing on the right side of the bike: under it you will find the oil filter, which must be extracted and replaced. After replacing the filter, it will be possible to top up the oil by inserting the oil in the breather located on the crankcase next to that of the filter.

Watch the video!


by ScegliAuto

More videos