Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Husqvarna 701 SM

Model: Husqvarna 701 Sm
Part: Clutch

Video tutorial

In today’s tutorial, you will learn how to replace the clutch discs on the Husqvarna 701 Supermoto. First, drain the engine oil by unscrewing the drain bolt located under the engine; then unscrew all the screws securing the clutch cover, as shown in the video.

At this point, unscrew the screws of the upper disc, removing the springs and the clutch discs; now you can replace them with new ones of the correct type. Finally, insert them correctly and reassemble the clutch pack, also replacing the gasket of the clutch cover!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Husqvarna 701 SM
How to Replace the Clutch on a Husqvarna 701 SM
701 Sm These brief and simple steps illustrate how to remove and replace the clutch on a Husqvarna 701 SM enduro bike. First, place the bike on a stand and …
How to Replace the Sprocket on the Husqvarna 701 SM?
How to Replace the Sprocket on the Husqvarna 701 SM?
701 Sm To replace the sprocket on the Husqvarna 701 SM, loosen the bolt located at the end of the swingarm to reduce the tension on the chain. Once the tens…
How to Replace the Exhaust of the Husqvarna 701 SM?
701 Sm You can replace the exhaust of the Husqvarna 701 SM by loosening the screws that secure the panel on the side of the rear mudguard. Once this panel i…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos