Do it yourself
Frequently asked questions about cars and motorcycles
To replace the sprocket on the Husqvarna 701 SM, loosen the bolt located at the end of the swingarm to reduce the tension on the chain. Once the tension is released, remove the screws securing the plastic cover protecting the sprocket, taking it off completely and unscrewing the nut underneath. This will allow you to slide out the old sprocket and insert the new replacement part around the chain; finally, reposition all the components and secure them with the appropriate bolts.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

701 Sm The Husqvarna 701 has two spark plugs: one located at the top and one at the bottom, both in a fairly accessible position, as indicated in the video.…
701 Sm To replace the valve cover on the Husqvarna 701 SM, loosen the bolts securing the seat to its housing so that it can be removed. This will give you a…
701 Sm To replace the fuel filter on the Husqvarna 701, unscrew the central bolt that secures the rear wheel, which can be removed after disconnecting the c…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos