Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let’s explore the procedure for performing routine maintenance by changing the engine oil and oil filter on the Husqvarna FE 350S enduro bike. First, drain the engine oil by unscrewing the drain bolt found on the sump; remove the plastic cover by unscrewing the screws. At this point, after allowing the oil to drain into a container, unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one. Unscrew the filler cap and pour in the new engine oil!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Husqvarna FE 350.
How to replace the engine oil and oil filter of the Husqvarna FE 350.
Fe 350 In this guide, we will see the instructions on how to perform the routine maintenance service by replacing the engine oil and oil filter of the Husqv…
How to Change the Engine Oil and Oil Filter on the Husqvarna FE 350
How to Change the Engine Oil and Oil Filter on the Husqvarna FE 350
Fe 350 Today we will discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Husqvarna FE 350 enduro bike. First…
Changing the Engine Oil and Oil Filter on the Husqvarna FE 350
Changing the Engine Oil and Oil Filter on the Husqvarna FE 350
Fe 350 In this short and simple guide, discover how to perform routine maintenance by changing the engine oil and oil filter on the Husqvarna FE 350 enduro …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos