Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on a Husqvarna FC 350?

Model: Husqvarna Fc 350
Part: Shocks

Video tutorial

To replace the rear shock absorber on a Husqvarna FC 350, you need to loosen the bolts securing the rear wheel, which must be removed from the swingarm for easier access. Once the wheel is removed, also unscrew the bolts securing the swingarm, which should be removed by loosening the bolts securing the shock absorber at the bottom; then, unscrew the bolts at the top, just below the seat, accessing from the sides of the bike.

This will allow you to remove the shock absorber and replace it with a new spare part.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Shock Absorbers on the Husqvarna FC 350?
How to Replace the Shock Absorbers on the Husqvarna FC 350?
Fc 350 To replace the shock absorbers on the Husqvarna FC 350, first remove the seat of the motorcycle to loosen the bolt that secures the rear shock absorb…
How to Replace the Rear Mudguard on a Husqvarna FC 350?
How to Replace the Rear Mudguard on a Husqvarna FC 350?
Fc 350 To replace the rear mudguard on a Husqvarna FC 350, you need to completely detach the seat to access the screws that secure the mudguard from the top…
How to Replace the Subframe on the Husqvarna FC 350
How to Replace the Subframe on the Husqvarna FC 350
Fc 350 This guide outlines the steps to remove and replace the subframe on the Husqvarna FC 350 enduro bike. First, place your bike on a stand and remove th…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos