Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husqvarna 701 Sm
Part:

In order to replace the levers of the Husqvarna 701, you need to loosen the nut located at the base of each lever: this nut must then be completely removed to remove the pin that locks the lever to its housing. Once the pin has been removed, you can disconnect the cable connected to the corresponding lever, so that it can be removed. After removal, you can insert the new one, so that it is fixed to its seat with the pin; finally, you will need to connect the cable to ensure that everything works.

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the levers on the Husqvarna 701?
How do you replace the levers on the Husqvarna 701?
701 Sm In order to replace the levers on the Husqvarna 701, you need to loosen the screws that hold them to their respective housings, located on the sides …
How to Replace the Spark Plugs on a Husqvarna 701?
How to Replace the Spark Plugs on a Husqvarna 701?
701 Sm The Husqvarna 701 has two spark plugs: one located at the top and one at the bottom, both in a fairly accessible position, as indicated in the video.…
How to Replace the Seat on the Husqvarna 701
How to Replace the Seat on the Husqvarna 701
701 Sm To replace the seat on the Husqvarna 701, loosen the screws that secure the side panels of the bike near the seat. Once these panels are completely r…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos