Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the levers on the Husqvarna 701?

Model: Husqvarna 701 Sm
Part:

Video tutorial

In order to replace the levers on the Husqvarna 701, you need to loosen the screws that hold them to their respective housings, located on the sides of the handlebars. Once these screws are loosened, you can remove the levers, which then need to be disconnected from their respective cables.

To do this, you need to loosen the washers between the end of the cable and the lever, so that it can be completely removed; at this point, you can insert the new lever, connecting it to the cable and securely fastening it to the respective housing.


Posted on 30 June 2025 by ScegliAuto


Related tutorials

701 Sm In order to replace the rear shock absorber of the Husqvarna 701, you need to loosen the screws that fix the piece to its housing: this will be locat…
701 Sm To replace the levers on a Husqvarna 701, loosen the nut located at the base of each lever. This nut must be completely removed to withdraw the pin t…
701 Sm The Husqvarna 701 has two spark plugs: one located at the top and one at the bottom, both in a fairly accessible position, as indicated in the video.…

How to Change the Engine Oil on the KTM EXC-F 350?

To change the engine oil on the KTM EXC-F 350, loosen the drain plug located at the central lower part of the oil sump: once this plug is removed, all the used oil can flow into a suitably positioned container. When all the oil has drained out, remove the oil filter from its housing and replace it with a new one: this filter is located on the left side of the bike. On the opposite side, there will be a breather through which to insert the necessary amount of new engine oil.

Watch the video!


by ScegliAuto

More videos