Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husqvarna 701 Sm
Part: Shocks

In order to replace the rear shock absorber of the Husqvarna 701, you need to loosen the screws that fix the piece to its housing: this will be located under the rear fender and above the swingarm, at the beginning of the latter. Once the fixing screws at the top and bottom have been loosened, it will be possible to remove the old shock absorber from its seat so that the new one can be inserted. At this point, it will be possible to fix it with the appropriate screws to ensure that everything works correctly.

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Husqvarna 701
How to Replace the Fuel Filter on a Husqvarna 701
701 Sm To replace the fuel filter on the Husqvarna 701, unscrew the central bolt that secures the rear wheel, which can be removed after disconnecting the c…
How to Replace the Fuel Filter on a Husqvarna 701
How to Replace the Fuel Filter on a Husqvarna 701
701 Sm To replace the fuel filter on the Husqvarna 701, loosen the fuel pump plate located at the bottom of the rear mudguard. Once loosened, collect the fu…
How to Replace the Battery of the Husqvarna 701?
How to Replace the Battery of the Husqvarna 701?
701 Sm To replace the battery of the Husqvarna 701, loosen the screws that secure the motorcycle seat so that it can be removed to access the components und…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos