Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the fuel filter on the Husqvarna 701, unscrew the central bolt that secures the rear wheel, which can be removed after disconnecting the corresponding brake caliper. Once the wheel is removed, you can access the components at the bottom of the rear mudguard, where the fuel filter is located in its designated tank. By unscrewing the securing screws, you can slide the filter out of its seat to insert a new one, remounting all previously removed components.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Husqvarna 701
How to Replace the Fuel Filter on a Husqvarna 701
701 Sm To replace the fuel filter on the Husqvarna 701, loosen the fuel pump plate located at the bottom of the rear mudguard. Once loosened, collect the fu…
How to Install the Additional Fuel Tank on the Husqvarna SM 701
701 Sm Today's steps will show you how to install the additional fuel tank on the Husqvarna SM 701 enduro bike. First, place the bike on a stand and start b…
How to Replace the Air Filter on the Husqvarna 701 SM
701 Sm This brief and simple guide provides instructions for removing and replacing the engine air filter on the Husqvarna 701 SM enduro motorcycle. First, …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos