Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the air filter of a Husqvarna 701, start by removing the seat. Use an appropriate key to unscrew the screws that secure the seat to the frame of the motorcycle. Once the seat is removed, you will find the air filter cover. Unclip or unscrew the filter cover using the necessary tools, being careful not to damage the surrounding parts. Carefully remove the old air filter from its housing and replace it with a new one, making sure it is positioned correctly. Reassemble the air filter cover, tightening the screws or hooks to ensure a perfect seal. Finally, put the seat back in place, screwing in the fastening screws and making sure it is securely in place. This process helps to keep your Husqvarna 701 engine in optimal conditions, ensuring a clean and adequate airflow.

Posted on 22 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Husqvarna 701 SM
701 Sm This brief and simple guide provides instructions for removing and replacing the engine air filter on the Husqvarna 701 SM enduro motorcycle. First, …
How to Change the Engine Oil and Oil Filter on a Husqvarna 701 SM
How to Change the Engine Oil and Oil Filter on a Husqvarna 701 SM
701 Sm In this guide, we will discover the instructions that will allow you to perform the routine maintenance service, replacing the engine oil and oil fil…
How to replace the engine oil and oil filter on a Husqvarna 701 SM
How to replace the engine oil and oil filter on a Husqvarna 701 SM
701 Sm Below, discover the steps that will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvarn…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos