Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door panel of the Hyundai I30

Model: Hyundai I30 GD, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

Today we will explain how to remove the rear door panel of a Hyundai I30. To perform this simple operation, we first need to open the door and remove the cover of the opening handle in order to unscrew the nut located at the back. We unscrew the nut located inside the armrest and proceed with the removal of the other locking nuts.

Using a flat-head screwdriver, we detach the panel from the door, being careful not to damage the connector. Disconnect the connector from the panel to remove it and perform the maintenance and checks that we want to carry out.


Posted on 13 June 2025 by ScegliAuto


Related tutorials

How to Remove the Door Speaker of the Hyundai I30
How to Remove the Door Speaker of the Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) Today, we will look at the instructions for removing and replacing the front door speaker of the Hyundai I30. First, open the front door and begin to…
How to remove the front headlight of the Hyundai I30
How to remove the front headlight of the Hyundai I30
Hyundai I30 (2011-2016 / GD, MK 2) In this video we can see how to disassemble the front headlight of the Hyundai I30: just open the front hood, and with a 12 mm socket, unscrew the sc…
How to Remove and Replace the Window Switch on the Hyundai i30
How to Remove and Replace the Window Switch on the Hyundai i30
Hyundai I30 (2007-2012 / MK 1, FD) Follow these simple steps to remove and replace the window switch on the Hyundai i30. First, open the front door and begin removing the door panel; u…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos