Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob of the Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Shift knob

Removing the gear knob of your Hyundai Santa Fe is really very simple and below you will find the description of the various steps you need to apply to complete the operation without any hitches. First of all, enter the interior of the car and make sure the car is turned off, then shift your attention to the gear lever and grab the knob firmly. At this point, all you have to do is pull upwards until it is completely removed and the procedure is successfully completed. You can then proceed with the installation of a new knob.

Posted on 21 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the car radio from the Hyundai Santa Fe
How to remove the car radio from the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Today's steps will show us how to disassemble and replace the original radio of the Hyundai Santa Fe, following the instructions below. First, we get…
How to Remove the Cooling Radiator from the Hyundai Santa Fe
How to Remove the Cooling Radiator from the Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) Here are the main instructions for removing and replacing the cooling radiator on the Hyundai Santa Fe. First, open the bonnet and start removing the…
How to Replace the Gearbox Oil in a Hyundai Santa Fe?
How to Replace the Gearbox Oil in a Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) To replace the gearbox oil in a Hyundai Santa Fe, access the components located at the bottom of the engine bay. Here, you will find a protective pan…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos