Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure on a Hyundai Kona

Model: Hyundai Kona MK 2 - Years: 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
This video is currently unavailable

Let's see how to reset the TPMS on the tyres of the Hyundai Kona: do this after verifying the correct pressure, comparing it with the label located on the driver's door pillar. Turn on the instrument cluster, and look for the button located under the dashboard, near the steering column (on the left side) or inside the glove compartment.

The exact location depends on the vehicle's trim. The button features a tyre icon.

Press and hold the button until the light on the dashboard starts to flash and then turns off by itself. In models with more advanced equipment, you can reset via the touchscreen: go to 'vehicle menu'/'user settings'/'vehicle settings'. From here, look for 'tyre pressure monitoring system'. Select 'reset', and again the TPMS light will start to flash and then turn off. In both cases, a relearning phase is necessary while driving, with a journey of 6-12 miles at a speed above 15 mph during which the system learns the new settings, storing them.


Posted on 13 June 2026 by ScegliAuto


Related tutorials

Hyundai Kona (2017-2023 / MK 1) The Hyundai Kona Electric, like many other cars, is equipped with a tire pressure warning light, which activates when the inflation pressure drops be…
Hyundai Kona (2017-2023 / MK 1) The tutorial presented on this page shows and verbally explains how to manage the tire pressure of the Hyundai Kona. The user manual is illustrated i…
Hyundai Kona (2023-2026 / MK 2) To reset the tyre pressure warning light on a Hyundai Kona, inflate the tyres until they reach the recommended pressure value: this value will be ind…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos