Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Disassembly and replacement of Hyundai i20 shell cover

Hyundai I20 - Video tutorial

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Key
Operation: Disassembly and replacement of Hyundai i20 shell cover

Required: Flat screwdriver, Phillips screwdriver, pliers with curved jaws. Step 1: Open the old and new key shells (pay attention to the spring) Step 2: Prepare the old key for the new shell Step 3: Remove the circuit board and battery from the old shell Step 4: Carefully remove the transponder , breaking the outer plastic with pliers Step 5: Cut the glue around the transponder chip using the cutter Step 6: Transfer the transponder chip, battery and circuit board to the new shell Step 7: Close the new case and secure it with the screw on the back.


Posted on 12 December 2023 by ScegliAuto

This video is currently unavailable


Hyundai I20 key shell replacement
Hyundai I20 (2014-2021 / IB, MK 2, GB) Today we will see how to replace the remote control key shell of a Hyundai I20 first series. First of all we take our remote control in hand and begi
Hyundai I20, I30 remote control key shell replacement
Hyundai I20 (2008-2014 / MK 1, PB) In this video tutorial we will see how to remove and replace the remote control shell of the key of a Hyundai I20 and I30. First of all we take our r
How to change the battery and key shell of the Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) In this video tutorial we will see how to remove and replace the key remote control battery, but also how to replace the entire shell of the Hyundai

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - Hyundai I20 key download: what to do? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos