Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Hyundai Venue?

Model: Hyundai Venue MK 1 - Years 2019-2026
Part: Door trim panel

To remove the door panel of the Hyundai Venue, loosen the screw located on the side of the panel near the outer handle. Next, detach the screw under the triangular panel corresponding to the outside mirror. The last screw to loosen will be on the armrest, near the window switch. Once this screw is loosened, you can completely detach the panel by releasing the clips inside. After disconnecting the connectors, you can attach them to the new panel, which should be properly secured.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter in the Hyundai Venue
How to Change the Cabin Air Filter in the Hyundai Venue
Hyundai Venue (2019-2026 / MK 1) In this guide, follow the steps to remove and replace the cabin air filter in the Hyundai Venue. First, get inside the vehicle on the passenger side …
How to Replace the Cabin Filter in a Hyundai Venue?
How to Replace the Cabin Filter in a Hyundai Venue?
Hyundai Venue (2019-2026 / MK 1) To replace the cabin filter in a Hyundai Venue, open the glove compartment located on the passenger side. Once opened, completely remove it to access…
Where is the engine fuse box located in the Hyundai Venue?
Where is the engine fuse box located in the Hyundai Venue?
Hyundai Venue (2019-2026 / MK 1) To quickly and safely locate the engine fuse box of your Hyundai Venue, you need to carefully read the following guide and follow the various steps. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos