Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Palisade
    4. : How to replace the battery on Hyundai Palisade

Hyundai Palisade - Video tutorial

Model: Hyundai Palisade MK 1 - Years 2019-2024
Part: Battery
Operation: How to replace the battery on Hyundai Palisade

If we want to replace the battery on this car we can find information on how to behave in the description below. After opening the bonnet we proceed to unhook the fixing clips of the air duct located on the right side, once the duct is removed under it we will find the battery. Then proceed to disconnect first the negative pole terminal and then the positive one, then proceed to unscrew the support nut of the plate located at the base of the battery and at that point we can proceed to remove it from its housing. Then take the new battery, place it, hang up and fix the support plate again and proceed to reconnect the negative pole first and finally the positive one.


Posted on 23 May 2024 by ScegliAuto



How to replace the battery of the remote control of the Hyundai Palisade?
Hyundai Palisade (2019-2024 / MK 1) Replacing the battery of the Hyundai Palisade remote control is an extremely simple and fast operation, let's see how to proceed in this tutorial. To
How to replace the remote control battery in the Hyundai Palisade?
Hyundai Palisade (2019-2024 / MK 1) In this tutorial we can see how to replace the remote control battery of the Hyundai Palisade. For this simple and quick operation, we will need a sp
How do you replace the windshield wiper blades on a Hyundai Palisade?
Hyundai Palisade (2019-2024 / MK 1) To replace the windshield wiper blades on the Hyundai Palisade, you need to lift the arms that control the movement of the blades and position them v

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos