Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Speakers of the Hyundai HB20

Model: Hyundai hb20 MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Speaker

See other generations:
Video tutorial

In this guide, follow the steps to remove and replace the rear speakers, which also applies to the front speakers, of the Hyundai HB20. First, open the trunk and start removing the door panel by unscrewing the mounting screws; then unscrew all the screws found on the side of the speaker, as shown in the video.

At this point, disconnect the speaker's electrical connector to remove it and replace it with the correct new one; apply the reverse procedure for reassembly!


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Replace the Speakers on the Hyundai HB20
How to Replace the Speakers on the Hyundai HB20
Hyundai hb20 (2012-2019 / MK 1) In this guide, let's see how to remove and replace the front speakers on the Hyundai HB20. First, open the front door and start unscrewing the screws…
How to Remove the Fuel Pump from the Hyundai HB20
How to Remove the Fuel Pump from the Hyundai HB20
Hyundai hb20 (2012-2019 / MK 1) Today, we will see, in this brief and simple guide, how to remove and replace the fuel pump of the Hyundai HB20, following the instructions below. Fi…
How to Reset the Service Light on a Hyundai HB20?
How to Reset the Service Light on a Hyundai HB20?
Hyundai hb20 (2019-2026 / MK 2) As we can see in this tutorial, resetting the service light on a Hyundai HB20 is an extremely simple and quick operation. Before proceeding, make sur…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos