Do it yourself
| ||||
|
Hyundai hb20 - Video tutorial
Model: Hyundai hb20
MK 1
- Years 2012-2019 Today we will see, in this brief and simple guide, how to disassemble and replace the fuel pump of the Hyundai HB20, following the instructions below. First, we open the rear doors of our car and begin to lift and remove the rear seat; then we remove the plastic cover of the fuel pump, disconnecting the electrical connector of the float and the gasoline tube, as shown in the video. At this point, we unscrew the ring to remove and replace the fuel pump with the new one, installing the original replacement!
Posted on 7 June 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |