Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers on the Hyundai HB20

Model: Hyundai hb20 MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Speaker

See other generations:
Video tutorial

In this guide, let's see how to remove and replace the front speakers on the Hyundai HB20. First, open the front door and start unscrewing the screws securing the door panel, prying at the edges to detach and remove it; then, remove the rivets securing the speaker using a drill bit to smooth them out. At this point, disconnect the speaker's electrical connector, remove it, and replace it with the new one; secure the new speaker with the rivets and finally reassemble the door panel!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Speakers of the Hyundai HB20
How to Replace the Rear Speakers of the Hyundai HB20
Hyundai hb20 (2012-2019 / MK 1) In this guide, follow the steps to remove and replace the rear speakers, which also applies to the front speakers, of the Hyundai HB20. First, open t…
How to Remove the Fuel Pump from the Hyundai HB20
How to Remove the Fuel Pump from the Hyundai HB20
Hyundai hb20 (2012-2019 / MK 1) Today, we will see, in this brief and simple guide, how to remove and replace the fuel pump of the Hyundai HB20, following the instructions below. Fi…
Removing the Shift Knob and Boot on a Hyundai HB20
Removing the Shift Knob and Boot on a Hyundai HB20
Hyundai hb20 (2012-2019 / MK 1) Today, let's go through the main steps to remove and replace the shift knob and boot on a Hyundai HB20. First, get inside the vehicle and start by un…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos