Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I20
  6. : How to reset TPMS in Hyundai I20

Hyundai I20 - Video tutorial

Model: Hyundai I20 GB, MK 2 - Years 2014-2020
Part: Instrument cluster
Operation: How to reset TPMS in Hyundai I20

In today's video we see how to intervene when the tire warning light is activated, in the Hyundai i20 instrument cluster. This tutorial also applies to other contemporary models of the Korean house. First we proceed by checking the tire pressure and, if necessary, we restore the correct level. We can then get into the car, turn on the ignition, and reset the parameter by pressing the appropriate button on the dashboard of the car. After a few seconds, the light should go off. If this is not the case, check the sensor located in the engine compartment of the car.


Posted on 10 December 2022 by ScegliAuto

    Frequently Asked Questions

    • I20 2014-2020 - Where are the warning lights on the Hyundai I20 shown? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos