Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlamp bulb on the Hyundai IX20

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Headlight bulb

If the headlamp bulb on your Hyundai IX20 (2010-2019) has suddenly stopped working and you want to learn how to replace it without calling a professional, just follow the instructions below. First, switch off the car and lift the bonnet. Next, locate the protective cover at the back of the headlamp and remove it by hand. At this point, also remove the old bulb and replace it with the new one. Finally, refit the cover and you are done.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Hyundai IX20
How to replace the front headlight bulb of the Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) Replacing the right front headlight bulb on a 2013 Hyundai IX20 vehicle is a simple and quick operation to be carried out independently. To replace t…
How to Replace the Fog Light Bulbs on the Hyundai IX20
How to Replace the Fog Light Bulbs on the Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) Learn how to replace the H7 bulb in the fog light of the Hyundai IX20: first, unclip the two buttons that hold the wheel arch liner under the bumper.…
How to Replace the Front Headlamp Bulb of a Hyundai Ix20
How to Replace the Front Headlamp Bulb of a Hyundai Ix20
Hyundai ix20 (2010-2019 / OJ) To perform this operation, it is advisable to release the bonnet from the latch to lift and secure it with the prop rod. Disconnect the battery cable…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos