Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Cylinder on the Hyundai i20

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021

Today's guide will show you the instructions to remove and replace the ignition cylinder on the Hyundai i20. First, get in the car and unscrew the two screws securing the plastic cover behind the steering wheel to remove it. Then, disconnect the electrical connector of the cylinder and press inside the small side hole to extract and remove it, as shown in the video. At this point, replace and install the new cylinder (thus replacing the ignition key), reassembling everything!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Hyundai I20
How to replace the battery of the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) The information provided in this guide will show us how to disassemble and replace the battery of the Hyundai I20, in simple and quick steps. First, …
How to Replace the Cabin Filter on a Hyundai i20
How to Replace the Cabin Filter on a Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) To replace the cabin filter on a Hyundai i20, remove the plastic panel located on the side of the passenger footwell. Once this panel is detached, yo…
How do you replace the battery of the Hyundai I20?
How do you replace the battery of the Hyundai I20?
Hyundai I20 (2014-2021 / GB, IB, MK 2) To replace the battery on the Hyundai i20, you need to open the hood in order to access the components located inside the engine compartment: on the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos