Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Gear Knob on the Hyundai i40

Model: Hyundai I40 MK 1 - Years 2011-2019
Part: Shift knob

This guide shows you how to remove and replace the gear knob on the Hyundai i40 in simple, quick steps. First, get in the vehicle and start by detaching the gear gaiter at the base. Once removed, disconnect the clip located between the gaiter and the knob, as shown in the video. At this point, pull the knob upwards with force to remove it; then install the new knob, securing it properly first to the gear lever and then to the gaiter, following the video tutorial to the end!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the heating radiator of the Hyundai I40
How to replace the heating radiator of the Hyundai I40
Hyundai I40 (2011-2019 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the heater radiator of the Hyundai I40's cabin. First of all, w…
Replace Key Battery in Hyundai i40
Replace Key Battery in Hyundai i40
Hyundai I40 (2011-2019 / MK 1) Follow these steps to remove and replace the battery in the remote key of a Hyundai i40: Take your remote and press the metal key release button; onc…
Where is the OBD port of the Hyundai I40 located?
Where is the OBD port of the Hyundai I40 located?
Hyundai I40 (2011-2019 / MK 1) If you are planning to use the OBD port of your Hyundai I40 but do not know where it is located, do not worry because in the following guide you will…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos