Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating radiator of the Hyundai I40

Model: Hyundai I40 MK 1 - Years 2011-2019
Part: Heater core

Today we will discover the instructions that will allow us to disassemble and replace the heater radiator of the Hyundai I40's cabin. First of all, we get on board the car and start by disassembling and removing the plastic panel located under the steering wheel; then we disconnect the various electrical connectors and disconnect the coolant circuit pipes, as shown in the video. At this point, we unscrew the radiator screws to remove it and replace it with the new one, letting any excess fluid drain out; we apply the reverse process for reassembly!

Posted on 10 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Hyundai I40 located?
Where is the OBD port of the Hyundai I40 located?
Hyundai I40 (2011-2019 / MK 1) If you are planning to use the OBD port of your Hyundai I40 but do not know where it is located, do not worry because in the following guide you will…
How to replace the battery of the Hyundai I40 key.
How to replace the battery of the Hyundai I40 key.
Hyundai I40 (2011-2019 / MK 1) In the following guide dedicated to those of you who own a Hyundai I40, we will explain how you can replace the battery inside the key in just a few …
How to replace the air filter of the Hyundai I40
How to replace the air filter of the Hyundai I40
Hyundai I40 (2011-2019 / MK 1) The following short video tutorial explains how simple and quick it is to replace the air filter on a Hyundai i40 with a 1.7 turbo diesel engine with…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos