Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio Trim from a Hyundai I20

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Car stereo

In this video, you will see how to remove the radio trim from a Hyundai I20; first, you need to remove the bezel; on this model with manual air conditioning, this posed some problems as it was necessary to pull down the entire lower part of the dashboard (this would not have been necessary with automatic air conditioning) and also remove the glove compartment. To do this, three screws need to be removed from under the dashboard, one underneath (in the footwell), then two central bolts in the middle of the glove compartment. You also need to remove the trim with the passenger airbag button (there are two screws underneath); it is necessary to slightly lift the upper part of the dashboard. Be careful with the electrical connectors, and then finally you will reach the air conditioning cables which can be loosened so that you can pull out the trim.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Car Radio on Hyundai I20
How to Replace the Car Radio on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Learn how to replace the car radio in your Hyundai I20. To remove the car radio, you need to take off the trim panels fixed to the centre console, he…
Removing the Car Radio on Hyundai i20
Removing the Car Radio on Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) Is the car radio in your Hyundai damaged? Here’s how to remove it from the dashboard. Remove the stereo trim with a plastic lever (where the air vent…
How to Remove the Stock Radio from a Hyundai i20 PB
How to Remove the Stock Radio from a Hyundai i20 PB
Hyundai I20 (2008-2014 / MK 1, PB) To independently remove the stock radio fitted in your Hyundai i20 PB, follow the steps described in this mini guide. Before starting, ensure the car…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos