Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on the Hyundai i30?

Model: Hyundai I30 MK 1, FD - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, see how to remove the front door panel on the Hyundai i30, a very simple and quick operation. First, open the door in question, then undo the screw located inside the opening handle using a cross-head screwdriver and remove the outer trim.

Continue by undoing the two additional screws located in the armrest, unclip the internal cover of the mirror, and, prying along the entire perimeter, separate the panel from the door. At this point, simply disconnect the window switch connector and fit any replacement.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Speaker of the Hyundai I30
How to Remove the Door Speaker of the Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) Today, we will look at the instructions for removing and replacing the front door speaker of the Hyundai I30. First, open the front door and begin to…
How to remove the rear door panel of the Hyundai I30
How to remove the rear door panel of the Hyundai I30
Hyundai I30 (2011-2016 / GD, MK 2) Today we will explain how to remove the rear door panel of a Hyundai I30. To perform this simple operation, we first need to open the door and remove…
How to replace the front headlight bulbs in the Hyundai I30?
How to replace the front headlight bulbs in the Hyundai I30?
Hyundai I30 (2007-2012 / MK 1, FD) In this tutorial we can see how to replace the front headlight bulbs in the Hyundai I30, a very simple and quick operation. First of all, make sure t…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos