Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the central part of the dashboard of the Hyundai I30.

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part: Dashboard

Today we will see the main instructions that will allow us to disassemble the central part of the dashboard, consisting of the car radio and air conditioning controls of the Hyundai I30. First of all, we get on board the car and start removing the side plastic panels, which also include the central air vents; then we subsequently remove the air conditioning controls, as shown in the video. At this point, we unscrew the fixing screws to also remove the car radio, disconnecting the wiring located on the back, following the video tutorial until the end!

Posted on 27 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio on a Hyundai I30
Removing the Radio on a Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) Replace the radio in the Hyundai I30 if you want to change it or if it is damaged. Remove the trim around the stereo using a plastic lever (where the…
Disassembly of the instrument panel of the Hyundai I30
Disassembly of the instrument panel of the Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) Below we will see the information that will allow us to disassemble and replace the instrument panel of the Hyundai I30 dashboard. First, we get into…
Where is the OBD port located in the Hyundai I30 2012?
Where is the OBD port located in the Hyundai I30 2012?
Hyundai I30 (2011-2016 / MK 2, GD) To independently locate the OBD port in your Hyundai I30, you must follow these simple steps. First, get into the car and reach the driver's seat, th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos