Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Genesis
    4. : How do you reset the tire pressure light on the Hyundai Genesis?

Hyundai Genesis - Video tutorial

Model: Hyundai Genesis BH - Years 2008-2016
Part: Checks and maintenance
Operation: How do you reset the tire pressure light on the Hyundai Genesis?

In order to reset the tire pressure warning light of the Hyundai Genesis, you need to inflate the tires to the recommended pressure level, as indicated on the sticker inside the driver's side door frame. Once the tires are inflated, you can connect a diagnostic tool to the vehicle's OBD port to reset the error that triggers the warning light. After resetting, you can start the engine and drive for about 20 minutes to allow the sensors to read the new pressure values.


Posted on 30 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos