Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Venue
    4. : Cabin air filter

Hyundai Venue - Cabin air filter

Hyundai Venue (2019-2024 / MK 1)
How to change the cabin air filter on the Hyundai Venue
Let's see in this guide the steps that will allow us to remove and replace the passenger compartment air filter of the Hyundai Venue. First we get on board the …read all…
Posted on 13 November 2022 by ScegliAuto
Hyundai Venue (2019-2024 / MK 1)
How to replace the cabin filter in the Hyundai Venue?
As we can see in this tutorial, replacing the cabin filter in the Hyundai Venue is an extremely simple and economical operation. After getting the right spare …read all…
Posted on 1 September 2022 by ScegliAuto
Hyundai Venue (2019-2024 / MK 1)
How do I replace the cabin filter on the Hyundai Venue?
In order to replace the cabin filter of the Hyundai Venue, you need to open the glove box located on the front passenger side: once this has been opened, it …read all…
Posted on 2 May 2024 by ScegliAuto
Car stereo (1) Bodywork (1) Key (3) Air conditioning (1) -board computer (2) Checks and maintenance (2) Cabin air filter (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Engine oil (2) Door panel (1) Gear Shift Knob (1) Instrument cluster (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos