Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service of the Isuzu D-Max

Model: Isuzu Isuzu D Max Rt85, Rt50 - Years 2011-2024
Part: Service warning light

To reset the service of the Isuzu D-Max there are two methods: a manual procedure without OBD equipment: turn on the ignition without starting the engine and press the "trip" button until the "oil life" screen (or service interval, depending on the version) is displayed. Hold down the "trip" button for 5/10 seconds, until the oil life percentage (or counter) starts flashing. Release and press again until you see 100%, or "---" (depending on the version). Turn off and on again to verify. If the manual procedure does not work, we must proceed with the OBD2 tool, connecting it to the diagnostic socket. Select the "service reset" or "maintenance" menu on the tool and follow the instructions it provides to reset the maintenance interval. If it is a model before 2012, we will instead have to disconnect the battery for about 15 minutes, then reconnect it and start to see if the warning light is off.

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) In this video we see how to reset the service light of the Isuzu D-Max. We must have all the doors closed and also check the front hood and the trunk…
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) In order to reset the Service light on the Isuzu D-Max, you will need to insert the ignition key into the corresponding slot, so that you can turn it…
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) To reset the service light on the Isuzu D-Max, first, get into the vehicle and close the doors. Then, turn on the ignition without starting the engin…

Other guides you may be interested in

    Frequently Asked Questions

    • Isuzu D Max 2011-2024 - What does the diesel filter indicator light on the Isuzu D-Max indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos