Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Isuzu D-Max

Model: Isuzu Isuzu D Max Rt50, Rt85 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

To reset the service reminder on an Isuzu D-Max, follow these steps: Insert the key into the ignition and turn it to the "ON" position. Do not start the engine.

Locate and press the partial odometer reset button. This button is usually found on the instrument cluster or at the end of the indicator stalk.

While holding the partial odometer reset button, turn the key to the "OFF" position. Continue holding the partial odometer reset button and turn the key back to the "ON" position.

Keep holding the partial odometer reset button for about 10-15 seconds until the service reminder starts flashing or resets on the instrument cluster. Release the partial odometer reset button.

Turn the key to the "OFF" position and remove it from the ignition. Start the engine to verify that the service reminder has been reset.

The service reminder should no longer appear on the instrument cluster.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to reset the service indicator on the Isuzu D-max
How to reset the service indicator on the Isuzu D-max
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) In this video we see how to reset the service light of the Isuzu D-Max. We must have all the doors closed and also check the front hood and the trunk…
How to Reset the Service Light on Isuzu D-Max
How to Reset the Service Light on Isuzu D-Max
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) To reset the service light on the Isuzu D-Max, first, get into the vehicle and close the doors. Then, turn on the ignition without starting the engin…
How to Reset the Service Light on an Isuzu D-Max?
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) To reset the Service light on the Isuzu D-Max, insert the ignition key into the corresponding slot to turn on the instrument cluster. Once the igniti…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos