Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the diesel filter on Iveco

Model: IVECO Iveco Various MK 1
Part: Diesel fuel filter

Let's see how to remove the diesel filter on Iveco: lift the front hood (where the engine is located), locate the diesel filter as shown in the video; with a screwdriver we unscrew the pins that secure the container to the filter holder (we can also use a socket wrench). Once the fuel circulation pipes have been disconnected, remove it from the engine compartment, extract the worn filter and clean the container. We insert the new filter in the container previously disassembled (we connect pipes and cables) and tighten the special pins. We close the front hood at the end of the maintenance.

Posted on 27 August 2019 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door handle on Iveco
How to remove the door handle on Iveco
IVECO Iveco Various Remove the door handle on Iveco? We open the door to access disassembly from inside the door. Remove the plastic covering that covers the handle from…
Engine and EDC warning light on an Iveco vehicle
Engine and EDC warning light on an Iveco vehicle
IVECO Iveco Various The EDC (Electronic Diesel Control) light that comes on in an Iveco engine is often accompanied by the engine light coming on, causing error codes P0…
How do you reset the Iveco car radio?
How do you reset the Iveco car radio?
IVECO Iveco Various To reset the radio of Iveco vehicles, you can turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel …

How to Remove an EGR Valve from a Land Rover Freelander

This video shows how to remove an EGR valve from a Land Rover Freelander. Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, removing the piece from the engine bay. Start unscrewing the fixing pins of the EGR valve as shown in the video. Once the piece is removed from its seat, unscrew the screws present on it with a screwdriver. Disconnect the power connectors from the valve, and remove it from the engine bay. Once the piece is removed, install the new EGR valve in the engine bay with the associated parts. Finally, reassemble the ventilation pipe in the engine bay after cleaning it of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos