Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to remove an EGR valve of a Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: EGR valve
Operation: How to remove an EGR valve of a Land Rover Freelander

Let's see in this video how to remove an EGR valve of a Land Rover Freelander. Lift the bonnet and put it in safety, then, with a screwdriver, unscrew the locking pins of the ventilation pipe, remove the piece from the engine compartment. We begin to disassemble the locking pins of the EGR valve as in the video. Once the piece has been disassembled from its seat, let's unscrew the screws on it with a screwdriver. We disconnect the power supply terminals from the valve, remove the same from the engine compartment. Once the piece has been removed, we put the new EGR valve back into the engine compartment with the attached pieces. Finally, we reassemble the ventilation pipe in the engine compartment, after having cleaned it from any traces of dirt and encrustations.


Posted on 11 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Freelander 2006-2016 - Why does the EGR valve of a Land Rover Freelander not work well? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos