Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front seat of the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Seat

These short and simple steps will show us how to disassemble the front seat of the Land Rover Evoque, following the instructions below. First, we open the front door of the vehicle and begin to unscrew all the fixing screws we find on the front seat guides, moving it back and forth; then we disconnect the electrical connector found underneath, as shown in the video. At this point, we remove the seat from the cabin, clean or repair it; then we reassemble and make the electrical connection of the seat!

Posted on 20 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Front Passenger Airbag on the Land Rover Evoque
How to Disable the Front Passenger Airbag on the Land Rover Evoque
Land Rover Evoque (2018-2026 / L551, MK 2) Today, you will see the instructions to disable the front passenger airbag on the Land Rover Evoque when a child seat is present. First, get inside t…
Resetting the service light of the Land Rover Range Rover Evoque MK1.
Resetting the service light of the Land Rover Range Rover Evoque MK1.
Land Rover Evoque (2011-2018 / L538, MK 1) In this video we see the oil change of the Land Rover Range Rover Evoque engine being carried out; we need to reset the system that warns us, with a …
How to replace the front headlight of the Land Rover Evoque
How to replace the front headlight of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) These short and simple steps will guide us through the process of disassembling and replacing the front headlight of the Land Rover Evoque. First, we…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos