Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to do maintenance in Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Engine
Operation: How to do maintenance in Land Rover Freelander

In today's video we see how to do maintenance on the first series of the Land Rover Freelander. Specifically, how to intervene to remedy the exhaust fumes in the diesel versions. First of all, we remind you to intervene only and exclusively with a cold engine. We open the engine hood. We remove the plastic cover from the engine. We locate the collectors and remove them. We proceed to cleaning them. We then check the EGR valve and its cleanliness. We can also clean the intake duct and check if there are any specific problems with the car. We then finish the job.


Posted on 23 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Freelander 2006-2016 - What problems have been encountered on the Land Rover Freelander td4? Read Answer
    • Freelander 2006-2016 - Land Rover Freelander TD4 engine problems, where do they come from? Read Answer
    • Freelander 1997-2006 - How many miles can a Land Rover Freelander drive? Read Answer
    • Freelander 2006-2016 - How many km can a Land Rover Freelander 2 drive? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos