Wheel bearing replacement on Iveco Daily

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Bearing

Loosen the bolts securing the affected wheel, lift the vehicle and unscrew them completely so that you can later remove the wheel. Now remove the brake caliper: to do this, unscrew the two bolts that secure it from behind and remove the pins as well. As shown in the video, at this point unscrew all the bolts that secure the brake disc, and remove this as well. Now, push the center pin of the hub and unscrew the large nut. At this point you are with the free hub: push the central bearing until it comes out, clean the hub and insert the new bearing.

Posted on 15 April 2021 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

- Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Tips on How to Change the Glow Plugs on 1.3 MJT Engines

The 1.3 CDTI engine is used in many models from Fiat, Lancia, Opel, and Suzuki, making glow plug wear a common issue. The glow plugs are located at the front of the engine, just in front of the rocker cover. Simply remove the engine cover to locate them. A quick functionality check can be done by disconnecting the connector and gently touching the glow plug with an electric wire connected to the positive terminal of the battery: if a spark occurs, the glow plug is fine. A problem that may arise during replacement is that the glow plug may not unscrew. It is advisable to spray some penetrating oil and let it sit overnight before unscrewing it with an 8 mm socket. Before installing the new one, apply some special grease and do not exceed the torque specification.

Watch the video!

by ScegliAuto

Wheel bearing replacement on Iveco Daily

Related tutorials

Other guides you may be interested in

Tips on How to Change the Glow Plugs on 1.3 MJT Engines

More videos