|
Do it yourself
| |||
| ||||
How to Replace a Front Wheel Bearing on a Ford Transit Custom MK7
Model: Ford Transit
Custom
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
In this video, we will see how to change a front wheel bearing on a Ford Transit Custom MK7. This operation requires professional equipment, so it is advisable to have the work done by a specialised workshop, but we will describe the various stages of the process: lift the vehicle and remove the wheel, then disassemble the brake caliper after retracting the piston. Loosen the axle nuts and remove the disc from its support. Clean the wheel bearing mounting seat with a wire brush and WD-40, then separate the disc from the hub, remove the bush (this operation is done with a special tool), and do the same to extract the hub from the inner ring of the bearing. Using the same tool, reassemble the bearing in its seat and then tighten the wheel bearing fixing bolts. Refit the brake caliper in its place, pushing the piston forward. You can then refit the wheel and lower the vehicle.
Posted on 6 February 2026 by ScegliAuto
Related tutorials
Ford Transit
(2006-2014 /
MK 7)
The battery replacement procedure on the Ford Transit Custom requires you to push the front passenger seat fully forward to access the panel undernea…
Ford Transit
(2012-2024 /
Custom)
In this new mini guide aimed at those of you who own a 2024 Ford Transit Custom, we will help you easily find the box containing all the vehicle's fu…
Ford Transit
(2012-2024 /
Custom)
In order to replace the front grille of the Ford Transit Custom, you need to pry it with an object so that it can be detached from its seat: at this …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |