Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : Front hub bearing replacement

Ford Transit - Video tutorial

Model: Ford Transit MK 7 - Years 2006-2014
Part: Bearing
Operation: Front hub bearing replacement

To replace the front wheel bearing, lift the car on the bridge and remove the wheel to be repaired; then remove the brake caliper complete with its support; remove the brake disc and proceed with disassembling the bolts fixing the hub to the front suspension and the central nut fixing the axle shaft (before removing the nut, knock on it to free the axle shaft). Complete the disassembly of the head of the steering box and the speed sensor; extract the shock absorber from its seat in the hub and remove the head of the suspension swinging arm. Once the support complete with hub has been placed on the bench, remove the seeger ring and, using a press, extract the old bearing and insert the new one. Then proceed backwards to install on board the car.


Posted on 1 August 2023 by ScegliAuto

Other guides that may interest you

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos